PDA

View Full Version : SVN and precompiled version do both not work for me



fredthemonkey
08-02-2008, 04:53 PM
Tech Stuff:
My OS: Kubuntu 8.04 (http://kubuntu.org) for 64 bit CPUs
Clanlib Version: 0.8.1 (I compiled it myself)

The linux binary didn't run
When I tried it, it said:

./novashell: error while loading shared libraries: libclanApp-0.8.so.1: cannot open shared object file: No such file or directory
The file is in: /usr/local/lib/libclanApp-0.8.so.1
I tried to hardlink it in /usr/lib and /usr/lib64 but it was no use.

The SVN-source didn't compile
After you set the right chmod (maybe this could already be done, too) on linux_make_novashell.sh and start it, you get:

Setting up for retail build
aclocal: `configure.ac' or `configure.in' is required
autoheader: `configure.ac' or `configure.in' is required
automake: `configure.ac' or `configure.in' is required
autoconf: no input file
linux_build_release.sh: 31: ./configure: not found
make: *** Keine Targets angegeben und keine ğmakeĞ-Steuerdatei gefunden. Schluss.
-e Error building executable!

After looking into the scripts i realised that this happens because in the file clanlibstuff/novashell/scripts/linux_build_release.sh on line 23 it says:

#sh linux_build_libs.sh
after i removed the sharp # infront of it, it went a little bit further:

This script will build the novashell executable. First, make sure you have the latest Clanlib 0.8.X from svn, and have done a make install with it.
Hit any key to continue....
Running from /home/user/Downloads/novashell-svn/clanlibstuff/novashell/scripts - building novashell
Setting up for retail build
Running from /home/user/Downloads/novashell-svn/SharedLib - Building shared libaries
Building Box2D...
make[1]: `Gen/float/libbox2d.a' is up to date.
make[1]: `Gen/fixed/libbox2d.a' is up to date.
Building linearparticle...
configure.ac: required file `./install-sh' not found
configure.ac: required file `./mkinstalldirs' not found
configure.ac: required file `./missing' not found
configure.ac:8: required file `./config.h.in' not found
sources/Makefile.am: required file `./depcomp' not found
configure: error: cannot find install-sh or install.sh in "." "./.." "./../.."
make: *** No targets specified and no makefile found. Stop.
Building lua
configure.ac: required file `./install-sh' not found
configure.ac: required file `./mkinstalldirs' not found
configure.ac: required file `./missing' not found
configure.ac:7: required file `./config.h.in' not found
src/Makefile.am: required file `./depcomp' not found
configure: error: cannot find install-sh or install.sh in "." "./.." "./../.."
make: *** No targets specified and no makefile found. Stop.
Building luabind
configure.ac: required file `./install-sh' not found
configure.ac: required file `./mkinstalldirs' not found
configure.ac: required file `./missing' not found
configure.ac:8: required file `./config.h.in' not found
src/Makefile.am: required file `./depcomp' not found
configure: error: cannot find sources (config.h.in) in . or ..
make: *** No targets specified and no makefile found. Stop.
autoheader: `configure.ac' or `configure.in' is required
automake: `configure.ac' or `configure.in' is required
autoconf: no input file
linux_build_release.sh: 31: ./configure: not found
make: *** No targets specified and no makefile found. Stop.
-e Error building executable!
Hit any key to continue....

Well, if everything worked, you have the novashell bin sitting in the clanlibstuff/novashell/bin dir. You'll need to download one of compiled distributionsfrom RTsoft to get the graphics/data to really test it though.
Hit any key to continue....

So that didn't work, too. The only way of getting novashell to my system was using wine then (worked fine, but having software running natively feels much better :) ).

Seth
08-04-2008, 04:43 AM
Thanks very much letting me know, I think I've fixed everything now.. please give her another shot!

fredthemonkey
08-04-2008, 08:11 PM
Thanks for trying to fix it - but it still doesn't work for me.
here's the build log:


This script will build the novashell executable. First, make sure you have the latest Clanlib 0.8.X from svn, and have done a make install with it.
Hit any key to continue....Running from /home/user/Downloads/novashell-svn/clanlibstuff/novashell/scripts - building novashell
Setting up for retail build
Running from /home/user/Downloads/novashell-svn/SharedLib - Building shared libaries
Building Box2D...
make[1]: `Gen/float/libbox2d.a' is up to date.
make[1]: `Gen/fixed/libbox2d.a' is up to date.
Building linearparticle...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking float.h usability... yes
checking float.h presence... yes
checking for float.h... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for ranlib... ranlib
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sources/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
cd . && /bin/bash /home/user/Downloads/novashell-svn/SharedLib/linearparticle/missing --run autoheader
touch ./config.h.in
make all-recursive
make[1]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/linearparticle'
Making all in sources
make[2]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/linearparticle/sources'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/linearparticle/sources'
make[2]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/linearparticle'
make[2]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/linearparticle'
make[1]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/linearparticle'
Building lua
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for ranlib... ranlib
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking stddef.h usability... yes
checking stddef.h presence... yes
checking for stddef.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for working volatile... yes
checking for ptrdiff_t... yes
checking for error_at_line... yes
checking for working memcmp... yes
checking whether time.h and sys/time.h may both be included... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for unistd.h... (cached) yes
checking for alarm... yes
checking for working mktime... yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible realloc... yes
checking for function prototypes... yes
checking whether setvbuf arguments are reversed... no
checking for working strcoll... yes
checking for strftime... yes
checking for floor... no
checking for localeconv... yes
checking for memchr... yes
checking for modf... yes
checking for pow... no
checking for setlocale... yes
checking for sqrt... no
checking for strchr... yes
checking for strcspn... yes
checking for strerror... yes
checking for strpbrk... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtoul... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
cd . && /bin/bash /home/user/Downloads/novashell-svn/SharedLib/lua/missing --run autoheader
touch ./config.h.in
cd . && /bin/bash ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make all-recursive
make[1]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/lua'
Making all in src
make[2]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/lua/src'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lapi.o -MD -MP -MF ".deps/lapi.Tpo" \
-c -o lapi.o `test -f 'lapi.c' || echo './'`lapi.c; \
then mv -f ".deps/lapi.Tpo" ".deps/lapi.Po"; \
else rm -f ".deps/lapi.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lauxlib.o -MD -MP -MF ".deps/lauxlib.Tpo" \
-c -o lauxlib.o `test -f 'lauxlib.c' || echo './'`lauxlib.c; \
then mv -f ".deps/lauxlib.Tpo" ".deps/lauxlib.Po"; \
else rm -f ".deps/lauxlib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lbaselib.o -MD -MP -MF ".deps/lbaselib.Tpo" \
-c -o lbaselib.o `test -f 'lbaselib.c' || echo './'`lbaselib.c; \
then mv -f ".deps/lbaselib.Tpo" ".deps/lbaselib.Po"; \
else rm -f ".deps/lbaselib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lcode.o -MD -MP -MF ".deps/lcode.Tpo" \
-c -o lcode.o `test -f 'lcode.c' || echo './'`lcode.c; \
then mv -f ".deps/lcode.Tpo" ".deps/lcode.Po"; \
else rm -f ".deps/lcode.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ldblib.o -MD -MP -MF ".deps/ldblib.Tpo" \
-c -o ldblib.o `test -f 'ldblib.c' || echo './'`ldblib.c; \
then mv -f ".deps/ldblib.Tpo" ".deps/ldblib.Po"; \
else rm -f ".deps/ldblib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ldebug.o -MD -MP -MF ".deps/ldebug.Tpo" \
-c -o ldebug.o `test -f 'ldebug.c' || echo './'`ldebug.c; \
then mv -f ".deps/ldebug.Tpo" ".deps/ldebug.Po"; \
else rm -f ".deps/ldebug.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ldo.o -MD -MP -MF ".deps/ldo.Tpo" \
-c -o ldo.o `test -f 'ldo.c' || echo './'`ldo.c; \
then mv -f ".deps/ldo.Tpo" ".deps/ldo.Po"; \
else rm -f ".deps/ldo.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ldump.o -MD -MP -MF ".deps/ldump.Tpo" \
-c -o ldump.o `test -f 'ldump.c' || echo './'`ldump.c; \
then mv -f ".deps/ldump.Tpo" ".deps/ldump.Po"; \
else rm -f ".deps/ldump.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lfunc.o -MD -MP -MF ".deps/lfunc.Tpo" \
-c -o lfunc.o `test -f 'lfunc.c' || echo './'`lfunc.c; \
then mv -f ".deps/lfunc.Tpo" ".deps/lfunc.Po"; \
else rm -f ".deps/lfunc.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lgc.o -MD -MP -MF ".deps/lgc.Tpo" \
-c -o lgc.o `test -f 'lgc.c' || echo './'`lgc.c; \
then mv -f ".deps/lgc.Tpo" ".deps/lgc.Po"; \
else rm -f ".deps/lgc.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT linit.o -MD -MP -MF ".deps/linit.Tpo" \
-c -o linit.o `test -f 'linit.c' || echo './'`linit.c; \
then mv -f ".deps/linit.Tpo" ".deps/linit.Po"; \
else rm -f ".deps/linit.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT liolib.o -MD -MP -MF ".deps/liolib.Tpo" \
-c -o liolib.o `test -f 'liolib.c' || echo './'`liolib.c; \
then mv -f ".deps/liolib.Tpo" ".deps/liolib.Po"; \
else rm -f ".deps/liolib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT llex.o -MD -MP -MF ".deps/llex.Tpo" \
-c -o llex.o `test -f 'llex.c' || echo './'`llex.c; \
then mv -f ".deps/llex.Tpo" ".deps/llex.Po"; \
else rm -f ".deps/llex.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lmathlib.o -MD -MP -MF ".deps/lmathlib.Tpo" \
-c -o lmathlib.o `test -f 'lmathlib.c' || echo './'`lmathlib.c; \
then mv -f ".deps/lmathlib.Tpo" ".deps/lmathlib.Po"; \
else rm -f ".deps/lmathlib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lmem.o -MD -MP -MF ".deps/lmem.Tpo" \
-c -o lmem.o `test -f 'lmem.c' || echo './'`lmem.c; \
then mv -f ".deps/lmem.Tpo" ".deps/lmem.Po"; \
else rm -f ".deps/lmem.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT loadlib.o -MD -MP -MF ".deps/loadlib.Tpo" \
-c -o loadlib.o `test -f 'loadlib.c' || echo './'`loadlib.c; \
then mv -f ".deps/loadlib.Tpo" ".deps/loadlib.Po"; \
else rm -f ".deps/loadlib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lobject.o -MD -MP -MF ".deps/lobject.Tpo" \
-c -o lobject.o `test -f 'lobject.c' || echo './'`lobject.c; \
then mv -f ".deps/lobject.Tpo" ".deps/lobject.Po"; \
else rm -f ".deps/lobject.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lopcodes.o -MD -MP -MF ".deps/lopcodes.Tpo" \
-c -o lopcodes.o `test -f 'lopcodes.c' || echo './'`lopcodes.c; \
then mv -f ".deps/lopcodes.Tpo" ".deps/lopcodes.Po"; \
else rm -f ".deps/lopcodes.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT loslib.o -MD -MP -MF ".deps/loslib.Tpo" \
-c -o loslib.o `test -f 'loslib.c' || echo './'`loslib.c; \
then mv -f ".deps/loslib.Tpo" ".deps/loslib.Po"; \
else rm -f ".deps/loslib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lparser.o -MD -MP -MF ".deps/lparser.Tpo" \
-c -o lparser.o `test -f 'lparser.c' || echo './'`lparser.c; \
then mv -f ".deps/lparser.Tpo" ".deps/lparser.Po"; \
else rm -f ".deps/lparser.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lstate.o -MD -MP -MF ".deps/lstate.Tpo" \
-c -o lstate.o `test -f 'lstate.c' || echo './'`lstate.c; \
then mv -f ".deps/lstate.Tpo" ".deps/lstate.Po"; \
else rm -f ".deps/lstate.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lstring.o -MD -MP -MF ".deps/lstring.Tpo" \
-c -o lstring.o `test -f 'lstring.c' || echo './'`lstring.c; \
then mv -f ".deps/lstring.Tpo" ".deps/lstring.Po"; \
else rm -f ".deps/lstring.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lstrlib.o -MD -MP -MF ".deps/lstrlib.Tpo" \
-c -o lstrlib.o `test -f 'lstrlib.c' || echo './'`lstrlib.c; \
then mv -f ".deps/lstrlib.Tpo" ".deps/lstrlib.Po"; \
else rm -f ".deps/lstrlib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ltable.o -MD -MP -MF ".deps/ltable.Tpo" \
-c -o ltable.o `test -f 'ltable.c' || echo './'`ltable.c; \
then mv -f ".deps/ltable.Tpo" ".deps/ltable.Po"; \
else rm -f ".deps/ltable.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ltablib.o -MD -MP -MF ".deps/ltablib.Tpo" \
-c -o ltablib.o `test -f 'ltablib.c' || echo './'`ltablib.c; \
then mv -f ".deps/ltablib.Tpo" ".deps/ltablib.Po"; \
else rm -f ".deps/ltablib.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT ltm.o -MD -MP -MF ".deps/ltm.Tpo" \
-c -o ltm.o `test -f 'ltm.c' || echo './'`ltm.c; \
then mv -f ".deps/ltm.Tpo" ".deps/ltm.Po"; \
else rm -f ".deps/ltm.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lundump.o -MD -MP -MF ".deps/lundump.Tpo" \
-c -o lundump.o `test -f 'lundump.c' || echo './'`lundump.c; \
then mv -f ".deps/lundump.Tpo" ".deps/lundump.Po"; \
else rm -f ".deps/lundump.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lvm.o -MD -MP -MF ".deps/lvm.Tpo" \
-c -o lvm.o `test -f 'lvm.c' || echo './'`lvm.c; \
then mv -f ".deps/lvm.Tpo" ".deps/lvm.Po"; \
else rm -f ".deps/lvm.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT lzio.o -MD -MP -MF ".deps/lzio.Tpo" \
-c -o lzio.o `test -f 'lzio.c' || echo './'`lzio.c; \
then mv -f ".deps/lzio.Tpo" ".deps/lzio.Po"; \
else rm -f ".deps/lzio.Tpo"; exit 1; \
fi
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT print.o -MD -MP -MF ".deps/print.Tpo" \
-c -o print.o `test -f 'print.c' || echo './'`print.c; \
then mv -f ".deps/print.Tpo" ".deps/print.Po"; \
else rm -f ".deps/print.Tpo"; exit 1; \
fi
rm -f liblualib.a
ar cru liblualib.a lapi.o lauxlib.o lbaselib.o lcode.o ldblib.o ldebug.o ldo.o ldump.o lfunc.o lgc.o linit.o liolib.o llex.o lmathlib.o lmem.o loadlib.o lobject.o lopcodes.o loslib.o lparser.o lstate.o lstring.o lstrlib.o ltable.o ltablib.o ltm.o lundump.o lvm.o lzio.o print.o
ranlib liblualib.a
make[2]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/lua/src'
make[2]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/lua'
make[2]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/lua'
make[1]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/lua'
Building luabind
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for gawk... (cached) gawk
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for size_t... yes
checking for error_at_line... yes
checking for ANSI C header files... (cached) yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
cd . && /bin/bash /home/user/Downloads/novashell-svn/SharedLib/luabind/missing --run autoheader
touch ./config.h.in
cd . && /bin/bash ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make all-recursive
make[1]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/luabind'
Making all in src
make[2]: Entering directory `/home/user/Downloads/novashell-svn/SharedLib/luabind/src'
if g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include/ClanLib-0.8 -I../../ -I../../lua -I../../lua/src -I../../../clanlibstuff/novashell/source -I../luabind -g -O2 -MT class.o -MD -MP -MF ".deps/class.Tpo" \
-c -o class.o `test -f 'class.cpp' || echo './'`class.cpp; \
then mv -f ".deps/class.Tpo" ".deps/class.Po"; \
else rm -f ".deps/class.Tpo"; exit 1; \
fi
make[2]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/luabind/src'
make[1]: Leaving directory `/home/user/Downloads/novashell-svn/SharedLib/luabind'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gawk... (cached) gawk
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking for main in -lGL... yes
checking for main in -lGLU... yes
checking for main in -lICE... yes
checking for main in -lSM... yes
checking for main in -lX11... yes
checking for main in -lXext... yes
checking for main in -lXi... yes
checking for main in -lXt... yes
checking for main in -lXxf86vm... yes
checking for main in -lasound... yes
checking for main in -lbz2... yes
checking for main in -ldl... yes
checking for main in -lm... yes
checking for main in -lpthread... yes
checking for main in -lxml2... yes
checking for main in -lz... yes
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking float.h usability... yes
checking float.h presence... yes
checking for float.h... yes
checking for stdbool.h that conforms to C99... yes
checking for _Bool... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for pid_t... yes
checking for size_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for vprintf... yes
checking for _doprnt... no
checking for floor... yes
checking for getcwd... yes
checking for sqrt... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating source/AI/Makefile
config.status: creating source/GUIStyleBitmap/Makefile
config.status: creating source/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
cd . && /bin/bash /home/user/Downloads/novashell-svn/clanlibstuff/novashell/missing --run autoheader
touch ./config.h.in
make all-recursive
make[1]: Entering directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell'
Making all in source
make[2]: Entering directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell/source'
Making all in GUIStyleBitmap
make[3]: Entering directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell/source/GUIStyleBitmap'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell/source/GUIStyleBitmap'
Making all in AI
make[3]: Entering directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell/source/AI'
if g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../../../SharedLib -I../../../../SharedLib/lua -I../../../../SharedLib/lua/src -I../../../../SharedLib/luabind -I../../../../SharedLib/misc -I../../source -I../../source/AI -I/usr/local/include/ClanLib-0.8 -g -O2 -MT Goal_Delay.o -MD -MP -MF ".deps/Goal_Delay.Tpo" \
-c -o Goal_Delay.o `test -f 'Goal_Delay.cpp' || echo './'`Goal_Delay.cpp; \
then mv -f ".deps/Goal_Delay.Tpo" ".deps/Goal_Delay.Po"; \
else rm -f ".deps/Goal_Delay.Tpo"; exit 1; \
fi
make[3]: Leaving directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell/source/AI'
make[2]: Leaving directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell/source'
make[1]: Leaving directory `/home/user/Downloads/novashell-svn/clanlibstuff/novashell'
-e Error building executable! 
Hit any key to continue....
Well, if everything worked, you have the novashell bin sitting in the clanlibstuff/novashell/bin dir. You'll need to download one of compiled distributionsfrom RTsoft to get the graphics/data to really test it though.
Hit any key to continue....

Dco
08-20-2008, 04:14 AM
As of revision 370, the source won't build for me because it fails to build /SharedLib/lua/src/liblualib.a, presumably because /SharedLib/lua folder is missing config.h.in. I managed to create it with
$ autoheader configure.ac.

That sufficed to let me build novashell, but when I run it, it just pops up a black screen then exits...

EDIT: I'm running ubuntu 8.04 (x86_64)

Seth
08-20-2008, 04:25 AM
As of revision 370, the source won't build for me because it fails to build /SharedLib/lua/src/liblualib.a, presumably because /SharedLib/lua folder is missing config.h.in. I managed to create it with

Thanks, I'll check it out. To test things, I did do a full build from a fresh checkout, but it's possible my automake tools are less picky for some reason. I'm using ubuntu 8.? 32 bit.


That sufficed to let me build novashell, but when I run it, it just pops up a black screen then exits...

Was a log.txt file created in its dir?

If it has a file not found error, it's because you will need to download the precompiled version and overwrite that binary with yours, so it has the graphics/resources available.

Dco
08-20-2008, 04:35 AM
Cool, it works now, thanks. I have this weird feeling that I just need to upgrade or downgrade some basic package.