Differences

This shows you the differences between two versions of the page.

--- proton_issues [2012/01/26 07:03] – seth
+++ proton_issues [2018/07/28 12:32] (current) – seth
@@ Line 2: / Line 2: @@
 === General ===
-  * Is it beta or not?  It's used in commercial products on most of its supported platforms, so, yeah.  I don't use version #'s yet, the latest version is just whatever is on the svn.  So a bit.. volatile but ready for commercial use for the daring.  I may eventually switch to actual versioning, but at this point it seems like an unnecessary hassle. I try very hard to keep all updates fully backwards compatible, the worst you have to do is add a .cpp or two to your project.
+  * What version is it?  Proton is unversioned and the only way to know what has changed or has been fixed is to look at the github history. Interfaces are not expected to change and no "breaking" changes should happen.
-  * RTPack.exe only available for Windows and linux at the moment, this command like utility is for processing textures and fonts. (Full source is in svn if you want to tweak it to compile for another platform.. OSX should be very easy)
   * Samples and docs are, how shall we say, lacking.
   * Proton internally shares all Surfaces/SurfaceAnims that use the same filename, including grid settings if it is broken up into an anim.  This could be a problem if you want to use a surface with multiple grid settings or want to dynamically modify a surface for only one instance - [[http://www.rtsoft.com/forums/showthread.php?4106-SetupAnimEntity-for-texture-mapping|a work around is explained here]]. (If you aren't using SurfaceOverlay components or the ResourceManager() to get your surfaces, you won't be affected)
+  * A note about audio managers: AudioManagerFMODStudio works with the latest versions of FMOD, so use that instead of AudioManagerFMOD unless you're supporting old code.
 === Windows (supported) ===
+  * Audio systems supported on Windows:  Audiere (recommended), FMOD, FMODStudio, SDL (SDL_Mixer)
   * True fullscreen modes not supported, but window resizing and alt-enter to toggle a pseudo fullscreen is (stretches to full current resolution)
-  * Supports three audio systems, Audiere (default) and FMOD and SDL_Audio (SDL_Audio only tested with WebOS builds).
+  * If _CONSOLE is defined, can be used to create console only apps. (They also work in linux, good for writing a server..)  It's possible to use SoftSurface in a console build. (RTPack does it)
-  * If _CONSOLE is defined, can be used to create console only apps. (They also work in linux, good for writing a server..)
+  * DirectX gamepads supported through GamepadManager
+  * Define **RT_WIN_MULTITOUCH_SUPPORT** to support multi-touch input.  May need the [[http://www.microsoft.com/en-us/download/details.aspx?id=3138|Win 7 SDK]]
+  * Define **RT_WIN_USE_APPDATA_SAVE_PATH** if you want Proton's GetSavePath() to return a unique user data path based on CSIDL_LOCAL_APPDATA instead of the current dir, which is the "correct way" for Win these days. Note, you should also add a **CreateDirectoryRecursively("", GetSavePath());** if you use this, as it returns a custom folder that might not exist, based on GetAppName()
+=== Linux ===
+  * Basic support should be pretty close to what is supported on Windows. Some things missing, like gamapad support, copy & pasting
+  * Uses SDL for graphics and input, SDL_mixer for sound.
+  * The build system uses CMake. It's easy to start a new project, since there's a ''Proton.cmake'' module available that can be used. Just select the parts that are needed. See [[proton:linux_setup|Compiling the examples for Linux]], the examples' ''CMakeLists.txt'' files and the comments in the ''Proton.cmake'' file.
+  * Console apps are possible with _CONSOLE defined. (see RTPack for an example of this)
+  * GL ES acceleration works fine with latest Raspian on the Raspberry Pi as of July 28th 2018.  (I only tested with no window manager, just from full screen apps from the command line)
 === Mac OS X (supported) ===
   * The only audio system currently supported is FMOD.
   * CocosDenshion should also work for audio in theory but I've only set it up for iOS so far.
-  * PPC compiling not supported, not planning on adding it either as the Mac App Store won't even accept universal binaries that include it.
-  * 64 bit builds might have issues, I'd stick to 32 bit for now.
   * Window rescaling/fullscreen toggle supported
+  * No gamepad supported
-=== iOS (supported)  ===
+=== iOS (supported) ===
-  * iPod Touch/iPhone/iPhone 3GS/iPhone4/iPad fully supported.
+  * iPod Touch/iPhone/iPhone 3GS/iPhone4/iPad/iPad4/iPhone5 native resolutions fully supported.
   * Supports three audio targets, AudioManagerDenshion (Recommended), AudioManagerOS (simpler) and AudioManagerFMOD (more powerful, can play midi/mod etc.. but FMOD isn't free for commercial use)
   * Only plays .wav and .mp3 formats when using AudioManagerOS and AudioManagerDenshion.
+  * Supports 60beat gamepad through GamepadManager.  iCade/etc coming...
+  * AudioManagerDenshion gotcha - music MUST be .mp3 or it breaks sfx.  Will change this to assert if
+  * Supports IAP - you must have RT_IAP_SUPPORT defined and InAppPurchaseManager.mm added to the project (see RTAdTest for an example of use)
+  * If RT_DISABLE_RETINA_ON_IPAD is defined project wide, iPad3 will run at iPad1 res instead of retina (useful if you don't want to update your GUI to the big screen or just want an FPS boost)
+  If you get a "dyld: Symbol not found: __NSConcreteGlobalBlock" error when running on iOS 3.X, you can fix this by adding -weak_library /usr/lib/libSystem.B.dylib to the extra linker command line in the project settings.  (Not a Proton issue, but here just in case you need it)
 === Android (supported)  ===
-  * Precompiled headers not setup, so compiling is slow
+  * Only plays .wav and .ogg audio formats.  Uses SoundPool for sfx internally, I think it needs sfx to be 1 mb or smaller, decompressed.  99 max loaded at once. (Things played as music don't apply to those limitations)
-  * Multi-touch automatically enabled on newer devices, but keep in mind some screen HW like Nexus Ones don't support "real" multi-touch and may appear buggy.
+  * If you tell it to play an .mp3, it will convert the file extension to .ogg automatically in AudioManagerAndroid.  Same with .wav, if an .ogg version exists.
-  * Only plays .wav and .ogg audio formats
   * 2D Particle system is slow, the iOS version uses point sprites but they didn't work on Android so it's using a fallback method at the moment.  Will change to use the global texture batcher at some point.
   * Doesn't support automatic orientation changes by tilting the device.
-  * If a header changes, you should run rebuild.bat, the ant ndk build system doesn't detect it.  If you get weird crashes for no reason, this may be why.
+  * If a header changes, you should run Clean.bat in case the ant ndk build system doesn't detect it.  If you get weird crashes for no reason, this may be why.
   * glClipPlane is ignored on a G1 and horribly slow on an Nexus One, avoid.
-  * Proton works uses the latest android sdk and ndk (r6) - can be made to work with crystax ndk versions as well
+  * Android In-App-Billing supported through IAPManager, see RTAdTest for example.  Updated to use Android's V3 billing system in June '13.
-  * I have built in support for TapJoy as well as in-app-purchase via the Android Market system written (via AdManager and IAPManager), but it's not quite ready for prime time.. but ask in the forums if you're interested in that.
+  * Tapjoy (ads and currency) and Hooked also supported
-=== HP WebOS (supported)  ===
+=== HP WebOS (deprecated .. not being supported anymore)  ===
   * Precompiled headers not setup, so compiling is slow
   * Vibration not supported yet, [[http://developer.palm.com/distribution/viewtopic.php?f=70&t=8779|not exposed in the 1.4.5 PDK]]
@@ Line 42: / Line 58: @@
   * Doesn't support automatic orientation changes by tilting the device.
   * Touchpad supported.  Define FORCE_IPHONE_SIZE if you want the Touchpad to use emulation mode and zoom up a 480X320 app itself
+  * IAP supported (will be functional on OS 3.0+ devices only, but you can target lower) (see RTAdTest for an example of use)
+  * No longer being developed as webOS seems to be dead
-=== RIM/Playbook/BBX (supported) ===
+=== RIM/Playbook/BBX (deprecated .. not being supported anymore) ===
   * Playbook supported.  Only RTBareBones and RTSimpleApp have example projects setup currently, they all require the QNX IDE the Playbook SDK comes with. I plan to support makefile only builds later.
   * Doesn't support automatic orientation changes by tilting the device.
   * Note: Playbook supports only 4 touches at once
   * OnEnterBackground gets incorrectly called at startup, this is because the OS is saying "We got thumbnailed" at startup and suspending (thumbnailing) and I don't see how to tell the difference
+  * Warning: I've had reports that builds I did for the Playbook do not work on the Alpha BB10 devices.  Probably need to compile with the new SDK, dunno.  Need device for testing
-=== Linux (Mostly supported?) ===
-  * Aki has been working to add support, there are .sh and make files to build RTBareBones and other examples, it uses behind the scenes SDL.  The RT3DApp doesn't function yet.
-  * Console apps are possible with _CONSOLE defined. (no example of this currently)
-=== State of the Irrlicht 3D module ===
+=== State of the Irrlicht 3D module (deprecated .. not being supported anymore) ===
   * Based on 1.7.1 beta (GLES branch)
   * The Irrlicht 3D example RT3DApp might not be setup for all platforms.
-  * It's been modified so it uses the WindowsDevice for ALL platforms for GL, and the iPhone device for ALL GLES platforms.  Platform specific code has been removed, as it overlapped with Proton.  It has no message pump, etc.
+  * Irrlicht has been modified so it uses the WindowsDevice for ALL platforms for GL, and the iPhone device for ALL GLES platforms.  Platform specific code has been removed, as it overlapped with Proton.  It has no message pump, etc.
   * Irrlicht has GLES 2.X support (?) but until Proton SDK adds GLES 2.X support it can't be used
   * It's been modified to support release/reload textures at any time.  (Needed for Android)
@@ Line 63: / Line 79: @@
   * You CAN use Irrlicht's internal GUI if you want, but the examples don't.  To do it, add all the their .cpp files to your project, and define _IRR_COMPILE_WITH_GUI_ - mouse input is not handled though, you'd probably have it a bit so you could send Proton mouse/touch events.
   * RTPhysics uses Irrlicht, IrrBullet and Bullet to show 3d physics.. the sample projects are only setup on Win and iPhone I believe.
-  *
-=== Symbian ===
-  * Not yet available.  Someone send Seth some devices and he'll do his best to add it as a target.
-=== Browser ===
+=== Flash (deprecated .. not being supported anymore) ===
+  * All non-Irrlicht examples are now compiling and running in Flash - although actually the latest Flash player seems to break input slightly so clicks go to the wrong place, need to investigate and update to the latest SDK.  But isn't Flash dying now?  Not sure if it's worth the time.
+=== HTML5 ===
+  * Works well on all popular browsers, including on iOS and Android.
-  * A definite possibility through Adobe Alchemy (Flash) or NaCI (Browser plugin that I think is Chrome only right now). Hope to play with this when those technologies mature a bit.
-=== Windows Phone 7 ===
-  * Only if they ever release a C++ capable NDK.  Switching to C# would be more of a rewrite, don't want to do that.