Differences

This shows you the differences between two versions of the page.

--- proton:raspi_setup [2016/06/18 07:29] – created seth
+++ proton:raspi_setup [2018/07/28 09:26] – seth
@@ Line 1: / Line 1: @@
-** Experimental and for linux pros only **
+** Compiling Proton and its examples on the Raspberry Pi with GL ES **
-These steps are what I use to compile stuff by copying things from my Windows computer.  A normal user would probably just grab the svn tree.
+As a base, I started with RetroPi (the image from 7/28/2018) on a Raspberry 3 B.  I should try it with a vanilla Raspbian Stretch install and see if that works too.
-Steps:
+First install Proton and compile its RTPack utility:
-* Install linux tools for Windows, rsync and ssh should work from the command line
+I ssh'ed in and did:
-* Setup a ssh key pair so you don't have to type passwords
-* Edit SetupVars.bat and edit the IP to the pi
-* Install development tools on the pi (sudo apt-get update && apt-get install build-essential)
-* Run CopyStuffToPi.bat.  There should now be a ~/proton tree on the pi
-* RTBareBones/CopyStuffToPiAndCompileLoop.bat and it should update that example and compile it in a loop
+<code bash>
+cd ~
+git clone https://github.com/SethRobinson/proton.git
+</code>
-If you look at the RTBarebones/linux dir you'll see the CMakeLists.txt file autodetect the pi and sets up GLES 1.1 headers stuff for it.
+Now let's build Proton's RTPack utility, will come in handle later.
+<code bash>
+cd ~/proton/RTPack/linux
+sh linux_compile.sh
+</code>
+Now let's compile and run RTBareBones:
+<code bash>
+cd ~/proton/RTBareBones/linux
+sh linux_compile.sh
+cd ../bin
+./RTBareBones
+</code>
+If that worked, enjoy the spinning triangle and text stretching!
+Now let's do RTSimpleApp, same thing but it needs SDL2_mixer for its audio, so let's get that installed:
+<code bash>
+sudo apt-get libsdl2-mixer-dev
+</code>
+Great.  Now we compile and run like before, but we're adding a step - compiling media with the RTPack utility.
+<code bash>
+cd ~/RTSimpleApp/linux
+sh linux_compile.sh
+cd ../media
+sh update_media.sh
+cd ../bin
+./RTSimpleApp
+</code>
+If that worked, enjoy the app.  If it didn't... off to the forums and yell at Seth!