User Tools

Site Tools


proton:raspi_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
proton:raspi_setup [2016/06/18 07:39]
seth
proton:raspi_setup [2018/07/28 09:26] (current)
seth
Line 1: Line 1:
-** Experimental ​and for linux pros only **+** Compiling Proton ​and its examples on the Raspberry Pi with GL ES **
  
-These steps are what use to compile stuff by copying things ​from my Windows computer.  ​A normal user would probably just grab the svn tree.+As a base, started with RetroPi (the image from 7/28/2018) on a Raspberry 3 B.  ​I should try it with a vanilla Raspbian Stretch install and see if that works too.
  
-Steps:+First install Proton and compile its RTPack utility:
  
-  * Install linux tools for Windows, rsync and ssh should work from the command line +ssh'ed in and did:
-  * Setup a ssh key pair so you don't have to type passwords +
-  * Edit SetupVars.bat ​and edit the IP to the pi +
-  * Give the video card more memory on the pi.  Run raspi-config and give it 128 or 256 (good for the pi3) +
-  * Install cmake on the pi (sudo apt-get install cmake) +
-  * Install SDL2 on the pi (sudo apt-get install libsdl2-dev libsdl2-image-dev libsdl2-ttf-dev libsdl2-mixer-dev) +
-  * Run CopyStuffToPi.bat. ​ There should now be a ~/proton tree on the pi +
-  * RTBareBones/​CopyStuffToPiAndCompileLoop.bat and it should update that example and compile it in a loop+
  
 +<code bash>
 +cd ~
 +git clone https://​github.com/​SethRobinson/​proton.git
 +</​code>​
  
-If you look at the RTBarebones/linux dir you'll see the CMakeLists.txt file autodetect ​the pi and sets up GLES 1.1 headers stuff for it.+Now let's build Proton'​s RTPack utility, will come in handle later. 
 + 
 +<code bash> 
 +cd ~/​proton/​RTPack/​linux 
 +sh linux_compile.sh 
 +</​code>​ 
 + 
 +Now let's compile and run RTBareBones:​ 
 + 
 +<code bash> 
 +cd ~/​proton/​RTBareBones/​linux 
 +sh linux_compile.sh 
 +cd ../bin 
 +./​RTBareBones 
 +</​code>​ 
 + 
 +If that worked, enjoy the spinning triangle and text stretching! 
 + 
 +Now let's do RTSimpleApp,​ same thing but it needs SDL2_mixer for its audio, so let's get that installed:​ 
 + 
 +<code bash> 
 +sudo apt-get libsdl2-mixer-dev 
 +</code> 
 + 
 +Great. ​ Now we compile and run like before, but we're adding a step - compiling media with the RTPack utility. 
 + 
 +<code bash> 
 +cd ~/​RTSimpleApp/​linux 
 +sh linux_compile.sh 
 +cd ../media 
 +sh update_media.sh 
 +cd ../bin 
 +./​RTSimpleApp 
 +</​code>​ 
 + 
 +If that worked, enjoy the app ​If ​it didn't... off to the forums and yell at Seth!
proton/raspi_setup.1466235555.txt.gz · Last modified: 2016/06/18 07:39 by seth